2x Reseal Kit for 700R4 Speedometer Gear Housings, fits BOP350 ( 6 piece )

Replacement seals and keeper wires for 700R4 / BOP350 speedometer gear housings.

Set includes TWO 2" black outer O-ring, TWO gray inner gear seal, and TWO inner seal keeper wires ONLY.


Separate keeper wires available -HERE-

SHIPS FREE in the USA!
(Economy shipping in lower 48 states only)

Both the O-ring and the inner seal fit housing applications with a 2" speedometer gear housing hole in the tail.
Both the O-ring and the inner seal fit the 30 series 700R4 housing as well as the 40 series 700R4 housing.
Only the inner gear seal will also fit 2004R bullet style housings ( not TH350 ), as well as 30 series TH400 housings and 40 series TH400 housings.
The inner seal keeper wire will fit all the applications the inner gear seal fits. (700R4 / BOP350 / TH400 / 2004R )

NOTE:
Outer O-ring will not fit TH-400 / NP208 housings.
Outer O-ring will not fit 2004R / TH350 or other bullet style housings.


If you are experiencing leaks coming from or around your speedometer gear housing, a worn or cut seal may be the cause.
An old or damaged driven gear can also cause a seal leak, even when new seals are installed. Replacing your driven gear may be necessary to stop the leak completely.

Carefully remove old, worn seals and reinstall new replacement seals to prevent further leaks. Make sure the inner gear seal is installed with the lip facing up (facing out). 
This will ensure the driven gear will not push/get hung on the lip, causing an improper stem seal.
We find this orientation works better, especially after the prior seal has already failed.


Outer O-Ring set available -HERE-
Inner Gear Seal set available -HERE-

For assistance feel free to send an email to: jim@speedometer.world